124198 Today
: If the chamber has positive pressure, connect a supply of pressurized air to the sight pipe to prevent soot buildup on the detector lens. 2. IKEA MALM Storage Bed (Part #124198)
: Use the three screws provided on the flange front section to lock the detector into place. 124198
This part is a 1-inch NPT internal thread mounting flange used to connect ultraviolet flame detectors (like the or C7961 series) to a sight pipe. : If the chamber has positive pressure, connect
: Position the metal lifting frame against the side panel of the bed. This part is a 1-inch NPT internal thread
: The 124198 is a medium-sized screw usually paired with parts 124197 and 124199.
: Hand-tighten initially to ensure alignment, then use the provided IKEA hex key to secure it firmly. Warning: Do not over-tighten, as this can strip the pre-drilled holes in the particle board. Other Possible References
: If the chamber has positive pressure, connect a supply of pressurized air to the sight pipe to prevent soot buildup on the detector lens. 2. IKEA MALM Storage Bed (Part #124198)
: Use the three screws provided on the flange front section to lock the detector into place.
This part is a 1-inch NPT internal thread mounting flange used to connect ultraviolet flame detectors (like the or C7961 series) to a sight pipe.
: Position the metal lifting frame against the side panel of the bed.
: The 124198 is a medium-sized screw usually paired with parts 124197 and 124199.
: Hand-tighten initially to ensure alignment, then use the provided IKEA hex key to secure it firmly. Warning: Do not over-tighten, as this can strip the pre-drilled holes in the particle board. Other Possible References