38578mp4 Apr 2026

: Define the "direction of pull"—the path the part will take when leaving the mold—by selecting a plane or planar face. Specify Angle : Enter the minimum required draft (typically 1∘1 raised to the composed with power 3∘3 raised to the composed with power for basic plastic parts, or higher for textured surfaces).

: The most common type where you select a base plane that remains stationary. The selected faces then taper away from or toward this plane at a specified angle. 38578mp4

: Used when a part has a non-planar split line. This allows you to apply different tapers on either side of the parting line. : Define the "direction of pull"—the path the

: Minimizes friction against the mold walls, extending the usable life of expensive manufacturing equipment. Implementation Workflow The selected faces then taper away from or

The Draft feature is a critical tool used primarily in mold design and the creation of plastic parts. It adds a slight taper or angle to the vertical walls of a 3D model, ensuring that parts can be easily ejected from a mold without sticking or causing damage. Core Types of Drafts

: Use the "Detailed Preview" to ensure the taper is moving in the correct direction (positive vs. negative draft) before finalizing.

: A more advanced option that allows for multiple draft angles to be applied to the same face starting from the same edge, often used in complex mold designs. Key Benefits for Manufacturing