Buying Or Building A Home [TESTED]
Deciding whether to buy an existing home or build a new one depends on your budget, timeline, and how much "perfection" you need. Generally, , while building offers total customization and fewer maintenance headaches in the first decade . Quick Comparison Buying Existing Building New Speed 30–60 day closing 6–12+ months Initial Cost Usually lower Higher (land + permits + construction) Upkeep Immediate (older systems) Minimal (all new materials) Customization Limited to renovations Near-total control Financing Standard Mortgage Construction-to-Permanent Loan The Case for Buying Existing
Found this looking for Neo2 system info, thanks for providing this!
Have been using Alphasmart 3000, Neo and Neo2 for decades w/o issue, so never bothered to collect tools or modify software or hardware. Changed my mind now that I encountered a
Bus Error Accessing: 0xE9BFEC11
Next Instruction At: 0x417F4E
following OS version prompt, but blocking any attempt to try to save or print text. Most of my search is future proofing atm., in case I’ll have more issues in the future and to find a daily backup solution. If you know of other tools or info not listed here, I’d much appreciate an update!
If the above error message gives any indication whether the problem is not just local (some part of SRAM corrupted, or not accessible) but global (SRAM contents are certain to be all gone) I can go ahead and change the CR2032 and reset the unit to get the OS restored. Otherwise, I have not yet given up on finding some USB protocol docs to see whether maybe a PC could access SRAM contents over USB.
Does AlphaSmart Manager still recognize your device? If so, it should be able to backup the text file contents to your computer. If not, the only method I can think of is to remove the CR2032, wait for a day or so, before replacing it to see if the error can be fixed.
Is there a compiled .OS3KAPP version of NeoFontTerminal?
Hi sam,
Yes, you can find the compiled applets in the Releases section of the github repository hosting the source code:
https://github.com/isotherm/betawise/releases