Chair.rar

Tip: Do not tighten completely until both runners are aligned to ensure the chair rocks evenly.

: The rocking motion can cause screws to loosen over time; check them every few months. Chair.rar

: Flip the wire Eiffel base upside down. Align the pre-drilled holes in the wooden runners with the brackets at the bottom of the base. Secure them using the provided screws. Tip: Do not tighten completely until both runners

: Insert the four main screws through the base into the seat shell. Tighten them in a diagonal pattern (like lug nuts on a car tire) to ensure even pressure and prevent the shock mounts from pulling. Align the pre-drilled holes in the wooden runners

: Flip the chair over and give it a test rock. If it feels wobbly, slightly loosen the runner screws, let the chair settle on a flat surface, and then re-tighten everything. Maintenance Tips

The (or Eames RAR ) is a design classic known as the Rocking Armchair Rod Base . Whether you have an original Vitra/Herman Miller or a high-quality replica, the assembly generally follows a simple four-part process. 1. Inventory Check Before starting, ensure you have the following components: 1x Seat Shell: Usually molded plastic or fiberglass. 1x Eiffel Base: The wire "rod" structure.

: Place the assembled wire-and-runner base onto the bottom of the seat shell. Align the four holes in the base with the shock mounts.