You’re offline. This is a read only version of the page.
: Plug the USB drive into the mini receiver’s USB port. The Update Process : Navigate to the receiver's Menu using the remote. Look for Tools , Upgrade , or USB Update . Select the .bin file you downloaded.
Always verify that the bin file matches your specific hardware version. Flashing the wrong firmware can result in a "no signal" error or a device that refuses to turn on. Download goldvision 500 mini bin
: The bin file must be downloaded and moved to a USB flash drive . The drive should be formatted to FAT32 for the receiver to recognize it. : Plug the USB drive into the mini receiver’s USB port
The "story" of updating these mini receivers usually follows a standard technical procedure: Select the
The receiver will display a progress bar. during this time, as interrupting the flash will likely permanently damage the device.