G7290.mp4 Apr 2026

While most kits include a basic tool kit with an Allen wrench and bar wrench, having a few extra tools on hand will save you significant time:

Start by attaching the on/off bar to the aluminum thickness rails using carriage bolts and plates. Secure them fingertight for now to allow for later adjustments.

Building your own lumber is a rewarding way to tackle specialty projects or quarter oversized logs that standard bandsaw mills can't handle. Whether you're working with a or Go to product viewer dialog for this item. g7290.mp4

Slide the long handle through the bosses on the end brackets. Ensure it is flush with the bracket ends before securing it with the small bolts provided.

, the assembly process is straightforward with the right approach. Essential Tools and Prep While most kits include a basic tool kit

A 1/2-inch deep socket and a 3/8-inch socket make tightening much faster.

Attach the end brackets to the thickness rails using carriage bolts and Nylock nuts. Pro Tip: Keep these slightly loose initially; this "play" makes it much easier to square the mill later on. Whether you're working with a or Go to

Assemble the adjustment posts and place them into the clamps on the end brackets. For the nose end, ensure the bar guard is properly installed for safety.