Mastercam 2017: For Solidworks Tutorial (lathe)

Go to the Mastercam Tab and select Lathe Default .

Pick your tool (typically a standard 80-degree diamond like a CNMG). Mastercam 2017 for SOLIDWORKS Tutorial (Lathe)

Make sure your X-coordinates go slightly past the center point (e.g., X -0.05) to ensure the part actually drops off without leaving a "stub." 6. Verify and Post Never send code to the machine without checking it first. Go to the Mastercam Tab and select Lathe Default

In the parameters, ensure you have a "Lead In" and "Lead Out" so the tool doesn't just plunge straight down into the material. 4. Roughing and Finishing This is where the shape happens. Mastercam 2017 for SOLIDWORKS Tutorial (Lathe)

You can’t cut air (well, you can, but it’s not productive).

Mastercam 2017 for SOLIDWORKS: Your Quick Guide to Lathe Programming