Nano10.rar Apr 2026

to a specific SCADA system or just doing basic ladder logic programming? user's manual - triplc.com

, you must establish a connection between your computer and the Connect the to your router or PC using a standard CAT5/CAT6 cable. Default IP Address: The defaults to 192.168.1.5 .

Run the extracted .jar or .exe file (often named TRiLOGI.exe ) to launch the programming environment. 2. Hardware Connectivity To communicate with the nano10.rar

Use a utility like WinRAR or 7-Zip to extract the contents.

The file is typically associated with the Nano-10 Programmable Logic Controller (PLC) from Triangle Research International (TRi). This compact controller is used in industrial automation for tasks like remote monitoring and web-based control. to a specific SCADA system or just doing

For more detailed technical specifications, you can refer to the Nano-10 User Manual or the Quick Start Guide provided by the manufacturer. Are you trying to connect the

Most TRi PLC software is Java-based. Ensure you have a compatible Java Runtime Environment (JRE) installed on your PC. Run the extracted

Your PC’s IP address must be in the same range (e.g., 192.168.1.10 ) for the initial setup. If your router uses 192.168.0.x , you must temporarily change your PC's IP to the .1.x range to access the PLC's configuration page and update its address. 3. Basic Programming (i-TRiLOGI) Once the software is running and the hardware is connected: