Locate the 4 or 5-digit code for your device in the One For All Code List . Hold until the LED blinks, then enter the code. Learning Mode:
Dedicated buttons allow you to switch between Low (300 CFM), Medium (350 CFM), and High (400 CFM) airflows. Urc 3410 Manual
Use the "975" command to enter learning mode and map functions button-by-button. Locate the 4 or 5-digit code for your
Unlike standard TV remotes, it typically does not require a direct line of sight, allowing it to work even if the filtration unit is mounted behind obstructions. Use the "975" command to enter learning mode
You can set the unit to run for 1, 2, or 4 hours before automatically shutting off.
A single remote can often be used to control multiple WEN 3410 units within the same workshop. Programming & Manual Setup
Find your TV brand’s specific digit (e.g., for Samsung, 8 for Sony). Hold the Setup or Magic button until the LED blinks twice.